Coloured Polycarbonate PL lens cap designed and manufactured at True Lens Services.
Our PL cap gives an airtight, positive seal that protects the lens in and around the PL mount.
Progressive, twist-lock action and tight feel allows the cap to sit snugly on the lens with minimal wear over time due to the inserted 'O' ring seal that keeps dust and debris ingress to a minimum.
Wide base and solid structure supports and protects the lens during handling and storage.
Provides the best protection for your optical investment.
See what Film and Digital Times said about our PL Caps here.
Serial number:
Black - PL-CP-001
Clear - PL-CP-002
Red - PL-CP-003 (on request only)
Green - PL-CP-004 (on request only)
Blue - PL-CP-005 (on request only)
Yellow - PL-CP-006 (on request only)
The 1.4x and 2.0x extenders are the perfect product to extend the focal length range of zoom and prime lenses. The 1.4x and 2.0x PL to PL stainless steel and aluminium alloy extenders have multi-coated optics for professional 35mm and full frame lenses.
These small and lightweight lens systems mount easily between the cameras PL mount and the zoom or prime lens PL mount.
The two extenders multiply the focal lengths of the base lens by a factor of 1.4 or 2.0 with one loss of iris stop for 1.4 and two for the 2.0. The combination of these extenders and zoom lenses provide a financially practical solution over expensive long range zoom lenses, with only little or no influence to the optical quality of the lenses.
Please note that these extenders will not fit every PL lens due to the optics inside. Please contact us for further information.
Product number:
1.4x - EX-X14
2.0x - EX-X20
The 1.4x and 2.0x extenders are the perfect product to extend the focal length range of zoom and prime lenses. The 1.4x and 2.0x PL to PL stainless steel and aluminium alloy extenders have multi-coated optics suitable for professional PL mount lenses up to and including full frame coverage.
These small and lightweight lens systems mount easily between the cameras PL mount and the zoom or prime lens PL mount.
The two extenders multiply the focal lengths of the base lens by a factor of 1.4 or 2.0 with one loss of iris stop for 1.4 and two for the 2.0. The combination of these extenders and zoom lenses provide a financially practical solution over expensive long range zoom lenses, with only little or no influence to the optical quality of the lenses.
Please note that these extenders will not fit every PL lens due to the optics inside. Please contact us for further information.
Serial number:
1.4x - EX-X14
2.0x - EX-X20
Push on, low flexing front lens cap to fit standard outside diameters of a wide variety of lenses.
Option to customise with own branded logo.
Converts lenses with a universal mount (66mm FP) to PL mount to fit cameras with PL port facility.
Cam driven focus system and chassis style lens housing allow matte boxes and other accessories to be attached to the front of the lens, without affecting focus movements. The benefit of zero backlash and image shift give accurate dual focus scales that repeat on direction and change with the cam drive system, giving a wide spread of markings through the scale.
Aluminium alloy, stainless steel, brass and robust construction guarantees along serviceable life.
Swirl effect bokeh with sharp center. Ideal as a portraiture lens.
Cam driven focus system and chassis style lens housing allow matte boxes and other accessories to be attached to the front of the lens, without affecting focus movements. The benefit of zero backlash and image shift give accurate dual focus scales that repeat on direction and change with the cam drive system, giving a wide spread of markings through the scale.
Aluminium alloy, stainless steel, brass and robust construction guarantees along serviceable life.
Cam driven focus system and chassis style lens housing allow matte boxes and other accessories to be attached to the front of the lens, without affecting focus movements. The benefit of zero backlash and image shift give accurate dual focus scales that repeat on direction and change with the cam drive system, giving a wide spread of markings through the scale.
Aluminium alloy, stainless steel, brass and robust construction guarantees along serviceable life
For attachment to focus, zoom or iris barrels of the lens. Wholly manufactured at True Lens from black acetal (Delrin), these gears are individually bored to lens location diameter.
Gears are bored 0.2/0.3mm interference diameter size (diameter and material dependant), heated and allowed to cool in position to grasp with an even pressure to the location diameter.
Can be secured to metal, plastic or flexible (rubber) surfaces.
Double stepped or shouldered diameters can be machined, which will enable gears to run concentric and true to lens.
Suitable for non-extending barrels when using fixed position follow focus units.
Standard 0.8MOD pitch gear teeth to match cine style follow focus gears.
Allow a minimum of 4.00mm solid acetal beneath root of gear when determining bore size.
Free measuring and fitting service available, return packing and carriage charges applicable.
True Lens Services Ltd, Glass House, Dawson's Lane, Barwell, Leicestershire, LE9 8BE. UK.
Telephone: +44 (0)1455 848 411 Sales Enquiries: sales@truelens.co.uk
Copyright © 2024. All Rights Reserved. Terms & Conditions • Cookie Policy • Privacy Policy
This site uses cookies to improve your online experience. By clicking ACCEPT, you are agreeing to True Lens Services’ and their partners' use of cookies. Click here Cookie Policy for further information.